Inputs. Slightly off on a tangent, but part of the picture, you can set any tracks input to receive audio from another track. This will be captured by arming that input and recording. This is an online process, so the 'feeder' track stays active and you can tweak fx plugins in real time and capture your changes live.
Pough and fde have covered it pretty much, Waveform is extremely flexible in this department, but you have to use a bit of brain power and create your own signal path.
Important note: as to rendering stems there are some quirks/problems that come with the flexibility. You might try to render a track and get the annoying 'didn't find any audio to render' dialogue. Waveform in its current versions only seems to be able to capture the signal to render at the point where it outputs to the 'default audio out', and you need to actively select/solo/mute/enable/disable things or temporarily change track outputs to render a stem. This will either make sense to you immediately or it will soon, based on your original question. Come back and ask specific questions if you need to.
Pough and fde have covered it pretty much, Waveform is extremely flexible in this department, but you have to use a bit of brain power and create your own signal path.
Important note: as to rendering stems there are some quirks/problems that come with the flexibility. You might try to render a track and get the annoying 'didn't find any audio to render' dialogue. Waveform in its current versions only seems to be able to capture the signal to render at the point where it outputs to the 'default audio out', and you need to actively select/solo/mute/enable/disable things or temporarily change track outputs to render a stem. This will either make sense to you immediately or it will soon, based on your original question. Come back and ask specific questions if you need to.
Statistics: Posted by dysjoint — Wed Aug 14, 2024 3:27 pm